What Is This Tool?
This converter enables translation between SCSI (Ultra-3), a parallel storage interface data transfer standard, and Virtual Tributary 1, a logical sub-channel signal used within SONET/SDH transport networks. It bridges legacy storage data rates and synchronous optical network streams for engineering and integration purposes.
How to Use This Tool?
-
Enter the numerical value representing the data transfer rate in SCSI (Ultra-3).
-
Select 'SCSI (Ultra-3)' as the input unit and 'Virtual Tributary 1 (signal)' as the output unit.
-
Initiate the conversion to view the equivalent data transfer rate in Virtual Tributary 1 units.
Key Features
-
Converts data transfer rates from SCSI (Ultra-3) to Virtual Tributary 1 (signal).
-
Supports understanding interface compatibility between storage and telecom technologies.
-
Useful for benchmarking and theoretical performance analysis.
Examples
-
1 SCSI (Ultra-3) equals 740.74 Virtual Tributary 1 (signal).
-
2 SCSI (Ultra-3) converts to 1481.48 Virtual Tributary 1 (signal).
Common Use Cases
-
Connecting enterprise hard drives and RAID controllers in legacy storage environments.
-
Transporting lower-rate circuits over higher-rate SONET/SDH links using Virtual Tributary channels.
-
Benchmarking storage and telecommunication interface compatibility.
Tips & Best Practices
-
Use the conversion primarily for theoretical analysis and performance benchmarking.
-
Consider the differing technologies behind each unit when comparing or integrating systems.
-
Verify integration results with actual system measurements beyond the conversion.
Limitations
-
Conversion abstracts fundamentally different technologies and may ignore protocol overhead.
-
Not designed for measuring precise real-world throughput or performance metrics.
-
Best suited for conceptual understanding rather than exact data transfer evaluation.
Frequently Asked Questions
-
What is SCSI (Ultra-3)?
-
SCSI (Ultra-3) is a generation of the parallel Small Computer System Interface standard used for block-level data transfers between hosts and storage devices.
-
What does Virtual Tributary 1 (signal) represent?
-
Virtual Tributary 1 is a logical sub-channel in SONET/SDH networks that carries lower-rate signals inside a higher-rate synchronous transport frame.
-
Why convert between SCSI (Ultra-3) and Virtual Tributary 1 (signal)?
-
Conversion helps translate data transfer rates for interoperability and performance comparison between traditional storage interfaces and telecom transport channels.
Key Terminology
-
SCSI (Ultra-3)
-
A parallel storage interface standard revision used for block-level data transfers between hosts and storage devices.
-
Virtual Tributary 1 (signal)
-
A logical sub-channel in SONET/SDH networks carrying a lower-rate plesiochronous digital signal within a higher-rate synchronous frame.
-
SONET/SDH
-
Synchronous optical network standards used for multiplexing and transporting digital signals over optical fiber.