What is FireWire (IEEE-1394)?

FireWire (IEEE-1394) is an IEEE-standardized serial bus interface designed for high-speed data transfer, supporting both isochronous and asynchronous streams with minimal host intervention.

What does STS3c (payload) represent?

STS3c (payload) is a contiguous transport channel in SONET with a gross line rate of 155.52 Mbps used for carrying high-bandwidth signals over optical networks.

Why convert FireWire data rates to STS3c payload units?

Converting allows mapping of device-based data transfer rates into standardized optical transport payloads, aiding integration of FireWire streams into backbone or leased-line optical networks.

How to Convert from Firewire (IEEE-1394) to STS3c (payload)?

Learn how to convert data transfer rates from FireWire (IEEE-1394) to STS3c (payload) for integrating high-speed device transfers into optical backbone networks.

Firewire (IEEE-1394)

STS3c (payload)

Please check your input. It must be a valid numeric value.

Firewire (IEEE-1394) to STS3c (payload) Conversion Table

Firewire (IEEE-1394)	STS3c (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Firewire (IEEE-1394) to STS3c (payload) Conversion Table
Firewire (IEEE-1394)	STS3c (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to transform data transfer values measured in FireWire (IEEE-1394) units into STS3c (payload) units, facilitating mapping of device data streams to optical transport network capacities.

How to Use This Tool?

Enter the value in FireWire (IEEE-1394) units you wish to convert.
Select FireWire (IEEE-1394) as the source unit and STS3c (payload) as the target unit.
Click convert to see the equivalent STS3c (payload) value based on the standardized rate.

Key Features

Converts data transfer rates between FireWire (IEEE-1394) and STS3c (payload) units.
Supports high-speed data rate conversions for telecommunications and media applications.
Browser-based and straightforward interface for rapid unit conversions.

Examples

1 FireWire (IEEE-1394) is approximately 2.6607 STS3c (payload).
5 FireWire (IEEE-1394) units convert to about 13.3035 STS3c (payload).

Common Use Cases

Mapping high-speed FireWire data streams to SONET STS-3c payload channels for network integration.
Linking digital camcorder data transfers to backbone optical links.
Facilitating leased-line services with ~155 Mbps circuits in enterprise networks.

Tips & Best Practices

Verify device generation to confirm exact FireWire transfer speeds before converting.
Consider overhead and framing bytes impacting usable payload in STS3c units.
Use conversions to plan integration of device-level transfers into optical networks accurately.

Limitations

Actual usable STS3c payload is slightly less than calculated due to SONET framing and overhead.
FireWire speeds vary between device versions; the tool assumes nominal maximum rates.
STS3c reflects physical layer capacity and may not encompass all protocol overheads.

Frequently Asked Questions

What is FireWire (IEEE-1394)?: FireWire (IEEE-1394) is an IEEE-standardized serial bus interface designed for high-speed data transfer, supporting both isochronous and asynchronous streams with minimal host intervention.
What does STS3c (payload) represent?: STS3c (payload) is a contiguous transport channel in SONET with a gross line rate of 155.52 Mbps used for carrying high-bandwidth signals over optical networks.
Why convert FireWire data rates to STS3c payload units?: Converting allows mapping of device-based data transfer rates into standardized optical transport payloads, aiding integration of FireWire streams into backbone or leased-line optical networks.

Key Terminology

FireWire (IEEE-1394): A standardized serial bus for high-speed device data transfer supporting isochronous and asynchronous streams.
STS3c (payload): A SONET payload container providing a contiguous transport channel with a line rate of 155.52 Mbps for optical networks.
Isochronous Transfer: A data transmission mode suitable for time-sensitive data streams, ensuring data delivery within periodic time frames.

Quick Knowledge Check

What type of interface is FireWire (IEEE-1394)?

A wireless communication protocol

A high-speed serial bus interface

An Ethernet standard

STS3c (payload) is primarily used in which type of network?

Optical transport networks

Wi-Fi local area networks

Bluetooth connections

What is a typical use case for converting from FireWire to STS3c?

Mapping video game inputs

Integrating device data into backbone optical links

Converting audio formats for streaming

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter