What does dyne second per square centimeter measure?

It measures dynamic (absolute) viscosity in the cgs system, identical to one poise, indicating the shear stress needed to produce a unit shear rate in a fluid.

Why use kilogram-force second per square meter for viscosity?

It is used in certain older engineering contexts or specifications where non-SI force units apply and conversions to SI units are needed for calculations.

How is the conversion between these units performed?

By multiplying the value in dyne second/sq. centimeter by the fixed conversion rate of 0.0101971621 to get the equivalent in kilogram-force second/square meter.

How to Convert from Dyne second/sq. centimeter to Kilogram-force second/square meter?

Learn how to convert dynamic viscosity measurements from dyne second per square centimeter to kilogram-force second per square meter, two units used in different measurement systems for fluid properties.

Dyne second/sq. centimeter

Kilogram-force second/square meter

Please check your input. It must be a valid numeric value.

Dyne second/sq. centimeter to Kilogram-force second/square meter Conversion Table

Dyne second/sq. centimeter	Kilogram-force second/square meter

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Dyne second/sq. centimeter to Kilogram-force second/square meter Conversion Table
Dyne second/sq. centimeter	Kilogram-force second/square meter

Explore More Viscosity Dynamic Units Converter

What Is This Tool?

This converter helps you change values of dynamic viscosity between dyne second per square centimeter and kilogram-force second per square meter. These units are used in different contexts for measuring a fluid's resistance to shear deformation or internal friction.

How to Use This Tool?

Enter the viscosity value in dyne second per square centimeter.
Select the target unit as kilogram-force second per square meter.
Apply the conversion to obtain the equivalent value using the formula provided.
Use the converted value for analyses or reporting in relevant engineering contexts.

Key Features

Converts between dyne second/sq. centimeter and kilogram-force second/square meter.
Supports viscosity measurement units from both the cgs and non-SI systems.
Provides straightforward multiplication based on a fixed conversion rate.
Ideal for use in rheology, fluid mechanics, and lubrication engineering.

Examples

5 Dyne second/sq. centimeter equals 0.0509858105 Kilogram-force second/square meter.
10 Dyne second/sq. centimeter equals 0.101971621 Kilogram-force second/square meter.

Common Use Cases

Interpreting viscosity values between cgs and non-SI force unit systems.
Reporting viscosity in older engineering documents using kilogram-force units.
Converting legacy fluid properties data for computational fluid dynamics (CFD) simulations.
Specifying lubricating oil viscosities for hydraulic systems designed with non-SI units.

Tips & Best Practices

Ensure correct unit selection before conversion to avoid errors.
Verify unit consistency when integrating converted values into engineering calculations.
Use this converter as a step to reconcile legacy data with modern measurement standards.
Always review the context where non-SI units are applicable to maintain accuracy.

Limitations

Kilogram-force second/square meter is a non-SI unit and may not be suitable for all scientific analyses.
Conversion accuracy depends on proper application of gravitational constants and unit definitions.
Users should confirm unit compatibility within specific engineering calculations.

Frequently Asked Questions

What does dyne second per square centimeter measure?: It measures dynamic (absolute) viscosity in the cgs system, identical to one poise, indicating the shear stress needed to produce a unit shear rate in a fluid.
Why use kilogram-force second per square meter for viscosity?: It is used in certain older engineering contexts or specifications where non-SI force units apply and conversions to SI units are needed for calculations.
How is the conversion between these units performed?: By multiplying the value in dyne second/sq. centimeter by the fixed conversion rate of 0.0101971621 to get the equivalent in kilogram-force second/square meter.

Key Terminology

Dyne second per square centimeter: A cgs unit of dynamic viscosity equal to one poise, representing the shear stress needed to create a unit shear rate.
Kilogram-force second per square meter: A non-SI dynamic viscosity unit indicating fluid resistance to shear, equal to 9.80665 pascal-second in SI units.
Dynamic viscosity: A property that measures a fluid’s internal resistance to flow or shear deformation.

Quick Knowledge Check

Which unit is equivalent to one poise in measuring dynamic viscosity?

Kilogram-force second per square meter

Dyne second per square centimeter

Pascal-second

What does the kilogram-force second per square meter quantify?

The shear rate in a fluid

Fluid resistance to shear deformation

Hydrostatic pressure

What conversion factor is used from dyne second/sq. centimeter to kilogram-force second/square meter?

0.1

0.0101971621

9.80665

Share Us

Similar Calculators

Online Volume Charge Density Units Converter Online Velocity Angular Units Converter Online Heat Density Units Converter Online Moment of Inertia Units Converter Online Concentration Molar Units Converter