What is a dyne per square centimeter?

It is a CGS unit of pressure, defined as one dyne of force applied uniformly over a square centimeter, also known as the barye.

Why is foot water measured at 4°C?

Water density is typically referenced at 4°C because it is the temperature where water is most dense, making it a standard for hydrostatic pressure.

Can I use this conversion at temperatures other than 4°C?

Conversions involving foot water at temperatures other than 4°C require adjustments, as water density changes with temperature.

Convert Dyne/square Centimeter to Foot Water (4°C) [ftAq]

Easily convert pressure values from dyne per square centimeter (dyne/cm²) to foot water (4°C) [ftAq], a unit based on the hydrostatic pressure from a water column at 4°C. Understand usage, conversion methods, and practical examples for applications in physics, hydraulics, and laboratory measurements.

Dyne/square centimeter

Foot water (4°C) [ftAq]

Please check your input. It must be a valid numeric value.

Dyne/square centimeter to Foot water (4°C) [ftAq] Conversion Table

Dyne/square centimeter	Foot water (4°C) [ftAq]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Dyne/square centimeter to Foot water (4°C) [ftAq] Conversion Table
Dyne/square centimeter	Foot water (4°C) [ftAq]

Explore More Pressure Units Converter

What Is This Tool?

This converter allows you to change pressure measurements from dyne per square centimeter—a CGS system unit for small pressures—to foot water (4°C), which corresponds to the pressure from a one-foot column of pure water at 4°C. It helps translate scientific and engineering data into terms used in fluid mechanics and hydraulic contexts.

How to Use This Tool?

Enter the pressure value in dyne per square centimeter you want to convert.
Select the target unit as foot water (4°C) [ftAq].
Click the convert button to obtain the equivalent pressure in foot water units.
Review the conversion result and use it for engineering, laboratory, or scientific purposes.

Key Features

Converts pressure from dyne/cm² (barye) to foot water (4°C) units accurately.
Browser-based tool suitable for physics, hydraulics, and laboratory use.
Provides practical examples demonstrating conversion calculations.
Facilitates comparison and interpretation between CGS and hydraulic pressure units.
Supports applications involving small pressures and hydrostatic head measurements.

Examples

10 dyne/square centimeter converts to 0.000334562 foot water (4°C).
100 dyne/square centimeter converts to 0.00334562 foot water (4°C).

Common Use Cases

Expressing low pressures or mechanical stresses in CGS-based physics research and legacy data.
Specifying hydraulic head and pump pressures in water distribution systems using water column units.
Interpreting manometer readings and converting between pressure and water head in laboratory or HVAC instrumentation.
Determining groundwater static head and depth-pressure relationships in environmental studies.

Tips & Best Practices

Ensure input values are in dyne per square centimeter for accurate conversion.
Be aware that foot water (4°C) references the density of water at 4°C, so temperature differences may affect accuracy.
Use this converter to interpret legacy scientific data alongside practical hydraulic measurements.
Handle very small decimal results carefully in calculations and reporting.

Limitations

The foot water unit is based on water density specifically at 4°C, so conversions at other temperatures may be inaccurate without adjustments.
Dyne per square centimeter represents extremely small pressures, which may result in very small decimal values in foot water units.
Precision in measurements and conversions should be managed to avoid misinterpretation of low-pressure data.

Frequently Asked Questions

What is a dyne per square centimeter?: It is a CGS unit of pressure, defined as one dyne of force applied uniformly over a square centimeter, also known as the barye.
Why is foot water measured at 4°C?: Water density is typically referenced at 4°C because it is the temperature where water is most dense, making it a standard for hydrostatic pressure.
Can I use this conversion at temperatures other than 4°C?: Conversions involving foot water at temperatures other than 4°C require adjustments, as water density changes with temperature.

Key Terminology

Dyne per square centimeter: A CGS pressure unit equal to one dyne of force over one square centimeter, also called barye.
Foot water (4°C) [ftAq]: A pressure unit defined by the hydrostatic pressure from a one-foot column of pure water at 4°C.
Hydrostatic pressure: Pressure exerted by a fluid due to gravity, often measured as height of fluid column.

Quick Knowledge Check

What does a dyne per square centimeter represent?

The pressure from a column of water

One dyne of force over one square centimeter

Hydrostatic pressure at 4°C

Foot water (4°C) is based on the pressure from what?

One-foot column of pure water at 4°C

One-square centimeter area with dyne force

Atmospheric pressure at sea level

Why must temperature be considered in these conversions?

Because water density varies with temperature affecting pressure

Because dyne/cm² changes with temperature

Because foot water is unrelated to temperature

Share Us

Similar Calculators

Online Thermal Resistance Units Converter Online Surface Current Density Units Converter Online Volume Units Converter Online Volume Dry Units Converter Online Weight and Mass Units Converter