What Is This Tool?
This converter helps you translate power values from microjoule per second, a unit measuring very small continuous power, to volt ampere, a unit representing apparent power in AC electrical circuits. It is useful in fields like electronics, photonics, and AC power system analysis.
How to Use This Tool?
-
Enter the power value expressed in microjoule per second (µJ/s).
-
Select the input unit as microjoule per second [µJ/s].
-
Choose the output unit as volt ampere [V*A].
-
Click the convert button to see the equivalent apparent power value.
-
Use the conversion output for understanding or further calculations in AC power contexts.
Key Features
-
Converts from microjoule per second (µJ/s) to volt ampere (V*A) accurately.
-
Supports small power measurements relevant to microelectronics and photonics.
-
Reflects apparent power units used in AC electrical engineering contexts.
-
Includes examples illustrating conversion of typical power values.
-
Browser-based and easy to use with a simple interface.
Examples
-
Convert 10 µJ/s to volt ampere: results in 0.00001 V*A.
-
Convert 500 µJ/s to volt ampere: results in 0.0005 V*A.
Common Use Cases
-
Specifying power consumption of ultra-low-power microcontrollers or IoT sensors.
-
Measuring optical power in sensitive photonics instruments and microscopy.
-
Characterizing output power from energy-harvesting devices at micro-watt levels.
-
Rating transformers, UPS, and generators by their apparent power capability.
-
Sizing electrical distribution equipment where apparent power matters regardless of power factor.
Tips & Best Practices
-
Always confirm the power factor if converting to real power values from apparent power.
-
Use the tool to compare small power levels with common AC system units for improved understanding.
-
Double-check units in your engineering or research contexts before applying the results.
-
Consider the phase angle implications in apparent power when interpreting conversion outcomes.
-
Utilize the clear examples to validate your input values before conversion.
Limitations
-
Volt ampere measures apparent power dependent on voltage and current phase angle, unlike microjoule/second which measures real power transfer.
-
Conversion assumes power factor of one; real AC circuits often have power factors below one, so the result is mainly a scale reference.
-
Numerical equivalence does not imply direct physical substitution due to differing power concepts.
-
Tool does not account for reactive power or phase angle effects in AC systems.
-
Exclusive to the specified units without support for other power or electrical units.
Frequently Asked Questions
-
What physical quantity does microjoule per second measure?
-
Microjoule per second measures power as the rate of energy transfer equal to one microjoule of energy transferred per second, representing very small power levels.
-
How is volt ampere different from watt?
-
Volt ampere is the unit for apparent power in AC circuits and considers both voltage and current without phase angle correction, whereas watt measures real power considering the power factor.
-
Can I use this conversion for any AC circuit directly?
-
Since the conversion assumes a power factor of one, it is mainly for scale comparison and not exact conversion in AC circuits where power factor varies.
Key Terminology
-
Microjoule/second [µJ/s]
-
A measure of power representing the energy transfer rate of one microjoule per second, corresponding to 10⁻⁶ watts, used mainly for very small power levels in electronics and photonics.
-
Volt ampere [V*A]
-
A unit of apparent power in alternating-current circuits equal to the product of root-mean-square voltage and current, important for rating equipment regardless of phase angle.
-
Apparent Power
-
The total power in an AC circuit measured in volt ampere, combining real power and reactive power components without phase angle consideration.