What does 1 calorie (IT)/second/square centimeter represent in watts per square meter?

It equals 41868.00000482 watts per square meter, representing the rate of heat transfer per unit area.

Why is it important to convert calorie (IT)/second/square centimeter to watt/square meter?

Conversion allows legacy or discipline-specific heat flux data to be used in current standard SI-based engineering calculations and analysis.

In which industries is this conversion most commonly applied?

This conversion is widely used in materials processing, welding, thermal protection, fire safety testing, photovoltaic engineering, HVAC, and building thermal design.

How to Convert from Calorie (IT)/second/square centimeter to Watt/square meter [W/m^2]

Easily convert heat flux density values from calorie (IT) per second per square centimeter to the SI standard watt per square meter [W/m^2] using this straightforward online tool.

Calorie (IT)/second/square centimeter

Watt/square meter [W/m^2]

Please check your input. It must be a valid numeric value.

Calorie (IT)/second/square centimeter to Watt/square meter [W/m^2] Conversion Table

Calorie (IT)/second/square centimeter	Watt/square meter [W/m^2]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

Calorie (IT)/second/square centimeter to Watt/square meter [W/m^2] Conversion Table
Calorie (IT)/second/square centimeter	Watt/square meter [W/m^2]

Explore More Heat Flux Density Units Converter

What Is This Tool?

This converter helps you translate heat flux density measurements from calorie (IT) per second per square centimeter, a unit used mainly in older or specific scientific fields, into watts per square meter, the internationally accepted SI unit. It facilitates the comparison and integration of thermal data in modern engineering and research.

How to Use This Tool?

Enter the heat flux density value in calorie (IT)/second/square centimeter
Select the input and output units if needed
Click convert to see the result in watt/square meter [W/m^2]
Use the converted value for engineering, research, or comparison purposes

Key Features

Converts heat flux density from calorie (IT)/s/cm² to watt/square meter [W/m^2]
Based on a precise conversion factor between units
Supports scenarios in welding, materials processing, and thermal engineering
Browser-based and easy to use without complex formulas
Suitable for interpreting legacy thermochemical and experimental data

Examples

Convert 2 calorie (IT)/second/square centimeter to watts per square meter: 2 × 41868.00000482 = 83736.00000964 W/m^2
Convert 0.5 calorie (IT)/second/square centimeter to watts per square meter: 0.5 × 41868.00000482 = 20934.00000241 W/m^2

Common Use Cases

Reporting high localized heat fluxes in welding and laser machining experiments
Expressing experimental heat flux results in calorimetry with traditional calorie units
Evaluating radiative or convective heat exposure for fire safety and thermal protection
Specifying solar irradiance measurements in photovoltaic system design
Calculating heat loss or gain in building thermal performance assessments
Describing heat fluxes in furnace, HVAC, and industrial heat-transfer analyses

Tips & Best Practices

Always verify unit definitions when dealing with calorie variations to ensure accuracy
Use this conversion when integrating older data sets into modern SI-based engineering work
Confirm that heat flux is uniform over the surface to avoid conversion errors
Cross-check converted values when performing critical calculations in thermal engineering
Leverage the tool to standardize data for easier comparison across different measurement systems

Limitations

The calorie (IT)/second/square centimeter unit is uncommon today, requiring careful handling of legacy data
Different calorie definitions may introduce inconsistencies if not specifically identified
Assumes uniform heat flux distribution across the area, which may not reflect all real situations

Frequently Asked Questions

What does 1 calorie (IT)/second/square centimeter represent in watts per square meter?: It equals 41868.00000482 watts per square meter, representing the rate of heat transfer per unit area.
Why is it important to convert calorie (IT)/second/square centimeter to watt/square meter?: Conversion allows legacy or discipline-specific heat flux data to be used in current standard SI-based engineering calculations and analysis.
In which industries is this conversion most commonly applied?: This conversion is widely used in materials processing, welding, thermal protection, fire safety testing, photovoltaic engineering, HVAC, and building thermal design.

Key Terminology

Calorie (IT)/second/square centimeter: A unit of heat flux density indicating the transfer of one international-table calorie of energy per second through one square centimeter of surface area.
Watt per square meter [W/m^2]: The SI unit for heat flux density describing the rate of heat transfer in joules per second per square meter of surface.
Heat Flux Density: The measure of heat power transferred per unit area, accounting for conductive, convective, or radiative modes.

Quick Knowledge Check

What is the SI unit that heat flux density in calorie (IT)/s/cm² converts to?

joule per second

watt per square meter

calorie per square meter

Which industry commonly uses this conversion for heat flux measurements?

Materials processing

Automotive manufacturing

Pharmaceutical production

Why should the differences in calorie definitions be considered?

They affect temperature readings

They can influence conversion accuracy

They alter area measurements

Share Us

Similar Calculators

Online Temperature Units Converter Online Data Storage Units Converter Online Charge Units Converter Online Permeability Units Converter Online Linear Current Density Units Converter