What Is This Tool?
This converter tool allows you to change volumetric flow rates expressed in barrel (US)/second—a unit commonly used for large liquid flows such as crude oil—into hundred-cubic foot/hour, a unit often used for low-to-moderate gas or air flows. It facilitates practical conversions between different measurement contexts within the oil, gas, and utility sectors.
How to Use This Tool?
-
Enter the flow value in barrel (US)/second you wish to convert.
-
Select 'barrel (US)/second' as the source unit and 'hundred-cubic foot/hour' as the target unit.
-
Click the convert button to obtain the equivalent value in hundred-cubic foot/hour.
-
Review the result along with example conversions for confirmation.
Key Features
-
Converts from barrel (US)/second to hundred-cubic foot/hour with a defined conversion factor.
-
Supports flow rate measurements in both liquid and gas flow units used in industry.
-
Provides unit definitions and typical applications for context understanding.
-
Includes example conversions to illustrate usage.
-
Helps bridge flow measurement standards across oil production, utilities, and HVAC systems.
Examples
-
1 barrel (US)/second equals approximately 202.125 hundred-cubic foot/hour.
-
2 barrel (US)/second converts to approximately 404.25 hundred-cubic foot/hour.
Common Use Cases
-
Reporting production rates of oil wells and fields using barrels per second or daily equivalents.
-
Sizing and monitoring crude oil pipelines and pump capacities with precise flow data.
-
Utility measurement and reporting of natural gas consumption for residential or commercial customers.
-
Monitoring low-rate gas supplies to appliances, burners, pilot lines, or process equipment.
-
Specifying or converting low-volume ventilation and exhaust airflows in systems using imperial measurements.
Tips & Best Practices
-
Ensure units represent compatible media before converting, as liquid and gas volumes differ in properties.
-
Use this converter primarily under standard conditions; account for temperature and pressure when needed.
-
Verify flow rates in context to avoid confusion between liquid and gas flow measurements.
-
Refer to example conversions to confirm correct input and output values.
-
Use the tool to facilitate communication and engineering calculations between different unit systems.
Limitations
-
Barrel (US)/second is a liquid flow unit, while hundred-cubic foot/hour applies to gases; direct equivalence depends on application context.
-
Temperature and pressure variations significantly influence gas volumes, affecting real-world conversions.
-
Standard conditions are assumed; effects of gas compression or expansion are not reflected.
Frequently Asked Questions
-
What does one barrel (US)/second represent?
-
It is a volumetric flow rate representing one US oil barrel passing a point every second, where one barrel equals exactly 42 US gallons or about 0.159 cubic meters.
-
When should I use hundred-cubic foot/hour?
-
Hundred-cubic foot/hour is typically used to express low to moderate gas or air flow rates, such as natural gas consumption in residential or small commercial settings.
-
Can I directly compare barrel (US)/second and hundred-cubic foot/hour?
-
Because barrel (US)/second is for liquids and hundred-cubic foot/hour for gases, direct equivalence depends on context and standard conditions, with temperature and pressure affecting gas volumes.
Key Terminology
-
Barrel (US)/second
-
A flow unit representing one US oil barrel (42 gallons) passing a location every second, used mainly for large liquid flows like petroleum.
-
Hundred-cubic foot/hour
-
A flow rate unit equal to one hundred cubic feet passing a point each hour, commonly employed to measure gas or air flows at low to moderate rates.
-
Volumetric flow rate
-
The volume of fluid passing through a given point per unit time, expressed here in various imperial units.